SCHOLARSHIP APPLICATION: (Deadline: APRIL 30th, 2026)
Please ensure all fields are filled in completely.To view previous winner: Click Here
(IF YOU HAVE ANY QUESTIONS, PLEASE EMAIL THE PROGRAM ADMINISTRATOR AT RYAN@STUDENTSCHOLARSHIPS.ORG)
Used Parts for Forklift
Used Forklift Parts - Inevitably, lift truck components will eventually wear out and need replacing. The alternative of acquiring brand new parts could become costly so one more idea is to purchase used components. This can save much cash in the end. It is a great idea to purchase used forklift components that have been reproduced. These parts would guarantee that you are getting parts which would work for a long time and be productive.
Broken or worn parts that are remanufactured are a less expensive solution as opposed to rebuilding. With rebuilding parts, just the components which are broken or worn out get replaced, which means that other wearable parts could break down soon after acquisition.
Remanufacturing on the other hand provides the best assurance for used parts. Remanufactured components are taken apart and cleaned and then all wearable pieces are changed. All wearable components are replaced regardless of age or wear which is another reason why remanufactured parts in general operate so much better. Whatever component within the part is brand new and this provides much longer life to the second-hand part. Based on the forklift parts that are being redone, the cleaning process and the complete remanufacturing process will vary.
After complete disassembly, the engines are oven cleaned. Several parts of the engine such as pistons, spark plugs, rings, filters, valves, and valve springs can be replaced during the remanufacture process. The engines are hot tested after reassembly to guarantee that there are no oil pressure problems, no leaks, noises or any vacuum.
Transmissions are disassembled, oven cleaned and pressure washed. A comprehensive inspection is done to be able to check for any cracks. Bushings, seals and bearings are all replaced. Normally, the replacement parts utilized on transmission parts meet OEM specifications.
Certain forklift components like the alternator, the water pump, torque converters, steer axles and the starter can be quite serviceable after worn components are replaced. The electronic control in the electric lift truck is maintained by the control card. This card can even be remanufactured with replacing all aged and worn out components. Unlike other forklift components the control card can only have the worn and aged parts replaced.
Remanufactured components are comprehensively examined upon reassembly to guarantee they are in top condition previous to being sold. It is vital when obtaining remanufactured parts to be certain they have undergone the proper testing and inspection procedures. On certain larger parts like for instance transmissions, steer axles and engines, OEM specification replacement components should be used.
The forklift dealer can guarantee that the components they have remanufactured meet the OEM specifications. This would even ensure the parts meet industry standards. A lot of details go into remanufacturing second-hand parts. This attention to detail provides more serviceability out of remanufactured parts than the components that were only rebuilt.
Click to Download the pdf
Forklift Parts
Lift Parts Express
TOLL FREE: 1-888-695-7994
Superior, Wisconsin
forkliftpartssuperior.com
Email Us
About Us